3m channel

Home3m channel
See how our solutions can align with the critical elements of your brand.
Every surface is an opportunity with 3M™ Graphic Films.
One Film. Two ways to install, wet or dry.
3M™ Protection Wrap Film Dual Installation
Can’t decide between a wet application or a dry application? Watch two pro technicians take on the same car using 3M Protection Wrap Film (PWF) to showcase the versatility of this car protective wrap film. While traditional PPF often requires moisture, the latest 3M tech, protection wrap film, also allows for a seamless dry application that can be faster than traditional wet-applied films. Whether you’re looking for the mirror-like finish of a car protective film wrap or the rugged defense of a film that is thicker than standard vinyl, this video shows you both workflows in action. No compromises—just elite protection and personalization. Key Technical Features: - Dual-Install Tech: Choose wet for precision or dry for speed. - Self-Healing: Minor scratches disappear with heat. - 10-Year Warranty: Backed by 3M science. - Paint-Like Finish: Available in many premium colors. Resources - Official 3M Protection Wrap Film Page: https://s.3m.com/gl1ar1op - Become a 3M Pro Shop Dealer: https://s.3m.com/hztmo3ye
3M Protection Wrap Film Wet vs Dry | Pro Install, No Compromise
Tired of scratching gloss vinyl during installation? Join a 3M Application Engineer he reveals the industry-first feature of 3M™ Wrap Film Series 2080: the Protective Film Layer (PFL). This conformable clear layer is designed to stay on your gloss wrap throughout the entire installation process—even in deep recesses—to prevent surface impressions and squeegee scratches. In this technical guide, we show you how to remove the PFL for a flawless, mirror-like finish every time. Key PFL Tips: - Leave it on: The PFL is highly conformable and should stay on during the entire install. - Easy Removal: Simply peel back from the edges once the panel is set. - Crucial Step: You MUST remove the PFL before final post-heating to ensure proper adhesion and finish. Resources - Official 3M 2080 Page: https://s.3m.com/flgcm70c - Become a 3M Pro Shop Dealer: https://s.3m.com/kg775ai0
How to Remove the Protective Film Layer on 3M™ Wrap Film 2080 | Tips & Tricks
Wrapping a roof can be challenging, especially around antennas and body gaps. Join 3M Application Engineers as they demonstrate the best technical practice for a flawless 3M™ Wrap Film Series 2080 roof install. From creating custom templates for shark fin antennas to using 3M Finish Line Knifeless Tape for precision edges, this guide covers the essential steps to ensure a high-quality, scratch-free finish. Tuck edges with confidence, as the Protective Film Layer (PFL) can conform to complex grooves and edges. Key Roof Install Tips: - Template: Use masking tape to create a template for things like antennas that can't be removed. - Wrinkle-Free Prep: Pull material firmly in all directions to the surface before squeegeeing, lightly heat to relax the film. - Precision Edges: Use Knifeless Tape for clean finishing cuts along the roof line. - The PFL Advantage: You can perform all edge tucking with the Protective Film Layer still on to prevent scratches. - Post-Heat: Always post-heat thoroughly after removing the PFL to set the film. Resources - Official 3M 2080 Page: https://s.3m.com/eg6g8mz0 - Become a 3M Pro Shop Dealer: https://s.3m.com/0n1vr459
How to Wrap a Car Roof with 3M 2080 Film | Tips & Tricks
Mirror caps are one of the most difficult parts of a vehicle to wrap due to their deep curves. Join 3M Application Engineers as they demonstrate the professional ""pre-stretch"" technique for a flawless 3M™ Wrap Film Series 2080 mirror installation. Use the vehicle window as a convenient anchor point, and 3M Precision Line Knifeless Tape for seamless seams, this guide covers the insider tips to ensure a high-quality finish without over-stretching. Achieve a perfect fit that stays in place even on complex contours. Key Mirror Install Tips: - Prep: Clean all outer edges thoroughly to remove wax and debris before applying Knifeless Tape. - The Pre-Stretch: Anchor one end of the film to the window, apply heat, and stretch it evenly before bringing it to the mirror. - Glass the Surface: Keep tension as you lay the film across the mirror's body line to avoid folds. - Precision Seams: Use Knifeless Tape for clean, hidden cuts on the mirror housing. - Heat Setting: Always finish by heat setting all edges to ensure the film holds its new shape. Resources - Official 3M 2080 Page: https://s.3m.com/15s3zhm5 - Become a 3M Pro Shop Dealer: https://s.3m.com/cii8oc41
How to Wrap Side Mirrors with 3M 2080 Film | Tips & Tricks
Cutting directly on a vehicle’s paint is a risk you don't have to take. Join 3M Application Engineers as they demonstrate the proper technique for using 3M™ Knifeless Tape to achieve clean, professional lines on your 3M™ Wrap Film Series 2080 installations. Safely cut through the film, even with the Protective Film Layer (PFL) still attached, for a flawless, damage-free finish. Key Knifeless Tape Tips: - Practice: To ensure a clean line every time, practice the technique before applying to a vehicle. - Surface Bond: Press the tape firmly to the body line to ensure the adhesive is fully bonded before laying the wrap film. - The Runway: Always leave at least 6 inches of tape extending past the cut point to give yourself enough room to pull the filament. - Get a grip: Fold the tape back on itself, pinch firmly, and use a quick, strong pull motion to release the filament from the carrier. - Consistent Pull: Pull the filament at a perpendicular angle and at a steady speed in the direction of the tape line. - Finishing: After cutting is complete and filament is free, remove the remaining green carrier from under the film and reapply the film with your hand or squeegee. Resources - Official 3M 2080 Page: https://s.3m.com/5uo32isl - Become a 3M Pro Shop Dealer: https://s.3m.com/7ze9vbl2
How to Use Knifeless Tape with 3M 2080 Wrap Film | Tips & Tricks
Wrapping a bumper can be one of the most challenging parts of a car wrap, but with the right techniques, you can achieve a flawless finish every time. Join 3M Application Engineers as they share professional tips and tricks for wrapping bumpers with 3M™ Wrap Film Series 2080. From using drop-in templates for complex recesses to making precise relief cuts, this guide covers the essential steps for a successful bumper install. Learn how to manage trapped air and why the Protective Film Layer (PFL) is a game-changer for maintaining a scratch-free finish. Key Bumper Install Tips: - Recesses and Scoops: Use drop-in templates for clean cuts and overlaps in tricky areas. - Clean Cuts: Use knifeless tape along the edges of all panels for a professional finish. - Relief Cuts: Make relief cuts over areas like intakes and lights to help the film relax. - Air Release: Use a heat gun and air release tool to slowly warm the film and remove trapped air. - The PFL Advantage: You can wrap the entire bumper with the Protective Film Layer still on to prevent scratches. - Post-Heat: Always post-heat thoroughly after removing the PFL to ensure the wrap is properly set. Resources - Official 3M 2080 Page: https://s.3m.com/6f1b1bc7 - Become a 3M Pro Shop Dealer: https://s.3m.com/osroaxtt
How to Wrap a Bumper with 3M 2080 | Tips & Tricks
Wrapping deep recessescan be a time-consuming task, but with the right techniques, you can achieve a smooth finish every time. Join 3M Application Engineers as they share professional tips and tricks for wrapping complex forms with 3M™ Wrap Film Series 2080. Learn how to avoid wrinkles and why the Protective Film Layer (PFL) is a game-changer for maintaining a scratch-free finish. Key Recess Install Tips: - Stretch the Form: Make sure the film is flat, and without wrinkles before squeegeeing. - Keep up the Heat: heat the channel until all wrinkles disappear, keep the material warm and firmly push your finger into the recess and drag in a smooth motion. - The PFL Advantage: You can wrap the entire section with the Protective Film Layer still on to prevent scratches. - Post-Heat: Always post-heat thoroughly after removing the PFL to ensure the wrap is properly set. Resources - [Official 3M 2080 Page](https://s.3m.com/qgtksk4m) - [Become a 3M Pro Shop Dealer(https://s.3m.com/lgyght3h)
How to Wrap Deep Recesses with 3M 2080 | Tips & Tricks
Load More... Subscribe