3m channel

Home3m channel
Managing heat is a constant challenge for refrigerated transportation and temperature-sensitive cargo. Applied to vehicle roofs, 3M™ Cooling Film uses passive cooling technology to reflect over 85% of solar radiation, helping reduce heat buildup without batteries or a power source. By helping reduce heat transfer through the roof, 3M™ Cooling Film can help support cooler transportation environments and improve efficiency across reefer fleet operations. Learn more about 3M™ Cooling Film: https://s.3m.com/4d4u81f6 #3M #3MFilms #3MCoolingFilm #FleetCooling #truckCooling #heatrejectionfilm #solarreflectivefilm #truckcoolingsystem #thermalreflectivefilm #FleetManagement #CommercialFleet #LastMileDelivery #FleetEfficiency
3M™ Cooling Film | Reflect 85% Solar Heat on Reefer Box Trucks
Experience the perfect blend of customization and defense. Protection wrap film is a combination of a color-change film and PPF. Wrapping complex curves like car mirrors requires specific techniques to handle the film's properties effectively while preventing adhesive lines and overstretching. In this video,a 3M application engineer shows you how to wrap a mirror with 3M Protection Wrap Film. He walks through the entire process, from surface preparation and stretch-limit management to specialized trimming and finishing techniques. Timestamps: (0:00) Introduction to Wrapping a Mirror with Protection Wrap Film (0:09) Mitigating Adhesive Rollovers with 3M Quick Wax (0:23) Removing the Cap Sheet and Liner (0:43) Stretching Limits and Anchoring the Film (1:11) Using a Flexible Squeegee for Compound Shapes (1:31) Tucking Film into Edges and Grooves (1:55) Trimming Techniques: Scoring vs. Cutting Through (2:36) Heating Edges and Activating Adhesion (2:53) Final Step: Post-Heating Techniques and Tools Highlighted in This Video: - Preparation & Liner Removal: To mitigate adhesive rollovers, always avoid making contact with the high points and use a little bit of a wax, such as 3M quick wax. Remove the cap sheet and the liner slowly, because the liner produces static that will absorb particles from the ground, which could potentially stick to the adhesive side. - Managing Stretch: The film will stretch up to 15%, but try to avoid reaching the limits of the film. Lock the film on the high points first, then pull and extend your hands up and down to lock the film on the outside of the installation area. - Squeegee Techniques: Use a flexible squeegee to fan around compound shapes and high points. When tucking film into grooves, make your first pass with the buffer and a second pass with the hard edge of the squeegee to tuck more film in. At the end, use the hard edge of the squeegee to activate adhesion by putting pressure on the adhesive. - Trimming: Because the film shares properties with PPF, you can either cut through the film or score and tear the film. Before cutting, always extend and snap the blade. Lightly score and tear the top to avoid cutting the clear coat of the paint, but cut through at the bottom if dealing with a really tight gasket. Every time you make a cut, try to get level with that cut. - Finishing: Before post-heating, hit the edges with heat to make the film relax around the perimeter. Learn More Protection Wrap Film https://s.3m.com/bp7b38wx Become a Dealer https://s.3m.com/i706pwjw #3MProtectionWrapFilm #ColorPPF #MirrorWrap #PWF #WrapTech
Installer Training: How to Wrap a Car Mirror with 3M™ Protection Wrap Film
Heat can build up quickly in fleet vehicles during long route days, frequent stops and constant sun exposure. 3M™ Cooling Film is a heat-reflective performance film that installs on vehicle roofs and uses passive cooling technology to reflect over 85% of solar radiation, keeping interiors up to 10°F (5.5°C) cooler with no batteries and no power source required. See how 3M™ Cooling Film helps keep fleet vehicles cooler where it counts. Learn more about 3M™ Cooling Film: https://s.3m.com/wjp7stpo #3M #3MFilms #3MCoolingFilm #FleetCooling #truckCooling #heatrejectionfilm #solarreflectivefilm #truckcoolingsystem #thermalreflectivefilm #FleetManagement #CommercialFleet #LastMileDelivery #FleetEfficiency
3M™ Cooling Film | Delivery Vans Up to 10°F Cooler
Heat exposure can increase the challenge of maintaining temperature-controlled rail transportation. 3M™ Cooling Film is a heat reflective performance film that installs on railcar roofs and uses passive cooling technology to help reduce heat buildup and support cooler transportation environments. See how 3M™ Cooling Film helps address heat where it starts. Learn more about 3M™ Cooling Film: https://s.3m.com/v7r8s0f3 #3M #3MFilms #3MCoolingFilm #RailCooling #RailcarCooling #FleetCooling #HeatReflectiveFilm #HeatRejectionFilm #SolarReflectiveFilm #ThermalReflectiveFilm
3M™ Cooling Film for Railcars | Passive Heat Rejection
Ensure your vehicle wraps stay perfectly in place over time. Post-heating is a very critical final step for all film installations, whether you are using graphic films, protection wrap film, or 3M™ Wrap Film Series 2080. It is very important that you do not just splash the film with heat and assume it gets up to the necessary temperature. In this video, a 3M application engineer gets into the weeds on essential post-heating instructions. He discusses the differences between standard heat guns and blowers, as well as the exact tools needed to properly verify your post-heat temperatures. Timestamps: (0:00) Introduction to Post-Heating (0:10) Standard Heat Gun vs. Blower (0:31) Why Post-Heating is Critical for All Films (0:45) Using an Infrared Camera to Verify Heat Signatures (1:18) Target Post-Heat Temperatures (200°F to 225°F) Techniques and Tools Highlighted in This Video: - Choosing the Right Heating Tool: While a standard heat gun allows you to set the temperature, 3M prefers using a blower. A blower heats the air just as well but moves it faster, which heats the film faster and moves the installation along quicker. - Verifying Temperature: The favorite tool for post-heating is the infrared camera. It allows you to use a crosshair to see the exact temperature of your film and view the actual heat signature from the heat gun. - Preventing Film Damage: Using an IR thermometer can be risky if the laser points to a different spot than where the heat is actually hitting, which can lead to burning a hole in the film. An infrared camera guarantees you are looking at the hottest part of your heating area. - Optimal Temperature Targets: It is imperative that you verify the film is brought up to the correct temperature range of 200°F up to 225°F. Resources Paint Protection Film https://s.3m.com/u1it1cfv Become a Dealer https://s.3m.com/tr617b4b #PostHeating #WrapInstaller #VehicleWrapTips #PPFWrapTricks
Installer Training: Post Heating Strategies | 3M™ Paint Protection Film
See how 3M™ Cooling Film is applied to fleet vehicle roofs as part of the installation process. Designed for transportation applications, 3M™ Cooling Film is a heat reflective performance film that helps reduce heat buildup by reflecting sunlight and releasing heat away from the vehicle roof. Installation Steps: (0:20) Clean roof surface with soap and water then finish with alcohol mixture. (0:31) Apply 3M Tape Primer 94 to all corners and curves. (0:52) Start at the first panel at the rear of the vehicle. (1:05) On flat areas, squeegee from the middle of the film out toward the edges. (1:17) Use a wrap glove and heat to adhere the film to complex curves or recesses. (1:35) Inspect roof for low spots and apply firm even pressure for propper bonding. (1:42) Work your way toward the front of the vehicle, overlapping by 1/4–1/2 inch. (1:50) Trim and squeegee all edges and post heat all stretched areas to 200°F-225°F This video demonstrates how quickly 3M™ Cooling Film can be installed on fleet vehicles, supporting efficient deployment with minimal disruption to operations. Once applied, the durable hard-coat surface resists dirt, chemicals and wear while maintaining high solar reflectivity, backed by a 5-year warranty. Whether you're evaluating 3M™ Cooling Film for fleet graphics, transportation applications or large-scale fleet deployment, this video provides an overview of the installation process and application considerations. Learn more about 3M™ Cooling Film: https://s.3m.com/cnsdezul #3M #3MFilms #3MCoolingFilm #FleetCooling #truckCooling #heatrejectionfilm #solarreflectivefilm #truckcoolingsystem #thermalreflectivefilm #FleetInstallation #FleetMaintenance
How to Install 3M Cooling Film on Fleet Vehicle Roofs | Tips & Tricks
Unlock the full potential of your paint protection film installations by mastering your liquid solutions. Knowing when to use slip versus tack is critical for suspending the film to maneuver it smoothly without premature adhesion, and then locking it securely into place. In this video, 3M Paint Protection Film Authorized trainer speaks to you about the solutions used during the installation of paint protection film. He breaks down how to mix and identify slip and tack solutions, as well as how to use them to clean, align, and anchor the film. Timestamps: (0:00) Introduction to Installation Solutions (0:08) Slip Solution vs. Tack Solution (0:22) Tips for Labeling Your Spray Bottles (0:32) Creating a Hybrid Solution (0:37) How and When to Use Slip Solution (0:51) Anchoring the Film with Tack Solution (1:09) Reducing Squeegee Friction Techniques and Tools Highlighted in This Video: - Slip Solution: A mixture of soap and water used to clean areas and spray underneath the film to help suspend it, which allows an opportunity to manipulate and align the film. Continuing to spray slip solution over the film surface will also help reduce friction between the film and the squeegee. - Tack Solution: A mixture of isopropanol and water, or straight distilled water, used to anchor the film in place when the final alignment point is found. This solution is also used to flush out edges at the end of the installation and assist in laying down fingers. - Bottle Labeling: To make it easier to identify each mixture during the installation process, label the slip solution with blue tape and the tack solution with red tape. - Hybrid Solutions: Installers also have the option to create their own hybrid solution using a combination of slip and tack. Resources: Paint Protection Film https://s.3m.com/nrtej54k Become a Dealer https://s.3m.com/fp0i3r0a #3MPPF #PPFSlipSolution #PaintProtectionFilm #PPFTraining #InstallerTips"
Installer Training: PPF Slip Solutions | 3M™ Paint Protection Film
Master the art of vehicle wrapping with 3M™ Wrap Film Series 2080, the innovative cast film designed for solid color detailing, decoration, and full wraps. Wrapping complex curves like car mirrors requires precision, the right technique, and a deep understanding of film properties to prevent overstretching and adhesive failure. In this video, a 3M Authorized Trainer demonstrates the expert techniques needed for seamlessly wrapping a car mirror with 3M™ Wrap Film Series 2080. You'll learn step-by-step best practices on how to handle the material, apply proper tension, and navigate tricky contours for a flawless finish. Timestamps: (0:14) Using a “Wrap-U” Tool (0:38) Avoiding Adhesive Rollover (1:07) Heating Film for better Conformity (1:20) Anchor on Edge of Mirror (1:48) Heat and Press Deep Recesses (1:57) Trim Edges with Relief Cuts (2:14) Heat and Relax Edges (2:43) Scoring Techniques (3:38) Finishing with Heat Resources: 2080 Wrap Film https://s.3m.com/0fp5qhsn Become a Dealer https://s.3m.com/8zbcxjy7 #3M2080 #CarMirrorWrap #VinylWrapTraining #3MFilms #CarWrapping
Installer Training: How to Wrap a Car Mirror with 3M™ Wrap Film Series 2080
Introducing 3M™ Paint Protection Film Series 150 Gloss — now available in the U.S. & Canada. PPF 150 was engineered to give installers the best of both worlds: the crystal-clear clarity and pristine, hydrophobic finish of our Pro Series 200, with the easy, flexible installation experience of our Series 100. The result is a film with great visual clarity that helps paint pop while making your install process smoother and more forgiving. What's new with PPF 150? - Exceptional clarity and gloss that lets paint shine through - Highly flexible and conformable, built to handle curves and grooves smoothly - Optimized adhesive for easy repositioning, minimizing lift lines and adhesive marks - Backed by a 10-year 3M warranty How does it compare? - vs. Series 100: Sharper clarity, same easy installation - vs. Pro Series 200: Same pristine, hydrophobic finish, easier installation experience Resources: Learn more or order yours: https://s.3m.com/5n63kf1k Become a 3M Dealer: https://s.3m.com/8srs70cl #3M #PPF #PaintProtectionFilm #PPF150 #VehicleProtection #AutoDetailing #CarCare
3M™ Paint Protection Film Series 150 Gloss | New Product Introduction
Load More... Subscribe